IK Multimedia iRig Pro I/O je ultra kompaktan profesionalni interfejs sa kvalitetnim audio/MIDI ulazom/izlazom pogodnim da svoje kreacije snimite bilo kad i bilo gde. iRig Pro I/O je naslednik prvog iRig Pro mobilnog interfejsa za povezivanje svih studijskih uredjaja sa iPhone-om, iPad-om, Mac-om, PC-em ili Androidom za reprodukciju i snimanje u pokretu.
iRig Pro I/O is designed for all your gear — studio mics, vocal mics, guitars, basses, keyboards, sound modules, MIDI Controllers — you name it. At its core, iRig Pro I/O features 24-bit A/D and D/A converters, and a 96kHz sample rate for professional quality audio on the go. When using a studio microphone, iRig Pro I/O can supply 48V of phantom power to the XLR jack for your active condensers. Plus, you can dial in the perfect and precise amount of gain with the new marked gain control knob. Recalling your gain settings for your mics and instruments has never been easier.
iRig Pro I/O also features a 1/4" Hi-Z input that easily handles passive and active pickup configurations. Again, the numbered gain wheel lets you dial in the perfect amount of input signal for your recordings and recall them with ease.
With iRig Pro I/O, you can use any microphone you own because it sports onboard 48V switchable phantom power for your condensers. iRig Pro I/O features a combination Neutrik XLR and 1/4" input jack, and an input gain control with a calibrated oversize knob for precise gain setting and recall. Now setup with your studio gear is easier than ever before. Simply plug in, adjust your input gain and hit record.
One of the major advancements of iRig Pro I/O is the addition of an 1/8" stereo headphone output with preamp and level control. Now you can play, record and monitor with all of your devices — even the most recent iPhones and iPads — with the depth and headroom you’d get only from a traditional recording studio setup.
In addition to the MIDI IN jack, iRig Pro I/O now features a MIDI OUT (thru) for even more routing flexibility. Now connect your outboard keyboards, controllers and sound modules and even control surfaces with just one simple interface. iRig Pro I/O comes complete with two standard 5-pin MIDI to 2.5 mm cables for hookup.
iRig Pro I/O has multiple power options depending upon your recording preferences.
When used as a standalone interface for iPhone, iPad or Android device, you can power iRig Pro I/O with 2 – AA batteries that also provide switchable 48V phantom power for condenser mics.
When used with a Mac/PC, iRig Pro I/O gets its power from the USB port and the connected laptop. Whichever method you choose, iRig Pro I/O will adapt and is ready to go at a moment’s notice.
iRig Pro I/O comes with over $/€550 worth of full version IK Software including AmpliTube for iOS, AmpliTube 4 for Mac/PC, SampleTank 3 SE, T-RackS Deluxe with Mic Room, and more. No other interface gives you so much value and playability right out of the box. With iRig Pro I/O and IK Software, there’s no limit to what you can do.